How to Install a Granite Sink to a Countertop？
1. The sink material is granite sink, and the countertop is quartz slab or artificial stone slab;
2. The basin buckle material is hardware;
3. AB glue
Water jet processing equipment
1. The sink is surrounded by a 45-degree bevel (as shown in the picture). The opening on the countertop must be made accurately according to the installation dimensions of the sink. The inner section of the countertop after digging the hole must also have a 45-degree bevel to match the slope of the sink. side cooperation；
2. Fix the sink on the waterjet workbench (a fixed installation fixture is required), fix it with the front side facing up, and cut the outer edge of the waterjet sink into a 45-degree slope；
3. Using the same procedure as above for cutting the sink, cut the countertop into a 45-degree bevel, corresponding to the bevel on the outer edge of the sink；
4. Apply AB glue to the inner section of the countertop after digging the hole, and fix it with the basin buckle on the back. The quantity is shown in the picture below, and use clamps to fix and lock the sink on the countertop.
5. After the glue dries, use fine sandpaper of more than 1000 grit and use water grinding to gently wipe away the traces of glue overflow when the edge of the sink is connected to the countertop.
